Refractory bricks and refractory castables are widely used

Refractory bricks and refractory castables are used in combination with each other. According to the actual use of kiln lining at present, the use rate of refractory bricks is still greater than that of refractory castables.

However, the two products have their own advantages and characteristics. We can't generalize which product is better than which one. It can only be determined from the field use part in the application link, and each cannot be replaced. Some parts with castings use refractory castables, but the use of refractory bricks can not meet the construction and use of special parts.

If the refractory bricks and castables are of the same material, the use of refractory bricks will be better than that of castables, because the refractory bricks have good fatigue resistance after high-temperature sintering, no shrinkage, and good wear resistance. However, for pipes, bends and parts with castings, castables are convenient for construction and process. Moreover, on the basis of castables, there is the production of prefabricated parts, which makes the use of the engraved parts more convenient and faster.

Refractory bricks and refractory castables are used in combination with each other. According to the actual use of kiln lining at present, the use rate of refractory bricks is still greater than that of refractory castables.

However, the two products have their own advantages and characteristics. We can't generalize which product is better than which one. It can only be determined from the field use part in the application link, and each cannot be replaced. Some parts with castings use refractory castables, but the use of refractory bricks can not meet the construction and use of special parts.

If the refractory bricks and castables are of the same material, the use of refractory bricks will be better than that of castables, because the refractory bricks have good fatigue resistance after high-temperature sintering, no shrinkage, and good wear resistance. However, for pipes, bends and parts with castings, castables are convenient for construction and process. Moreover, on the basis of castables, there is the production of prefabricated parts, which makes the use of the engraved parts more convenient and faster.